Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual

Page: 298 / 458

LONG-TERM STORAGE OPERATION
3–228
AFTER STORAGE
After storage:PC-0000-870K03A
NOTICE
If the machine is stored without carrying out the monthly rust-prevention operation, consult your
Komatsu distributor before using it.
When using the machine after long-term storage, do as follows before using it.
q
Wipe off the grease from the hydraulic cylinder rods.
q
Add oil and grease at all lubrication points.
q
When the machine is stored for a long period, moisture in the air will mix with the oil. Check the oil before and
after starting the engine. If there is water in the oil, change all the oil.
q
Insert the battery disconnect switch key and turn it to the ON position.
For details of the operating method, see "BATTERY DISCONNECT SWITCH (3-127)".
q
If the machine is stored with the battery cable taken off or the battery disconnect switch is turned OFF for a
long time, the clock time information and radio station selecting information may be lost. In this case, see
"CLOCK ADJUSTMENT (3-68)",Handling radio (3-116)" and set again.
STARTING MACHINE AFTER LONG-TERM STORAGE
Starting machine after long-term storage::PC220_KU-0000-870K04A
When starting the engine after long-term storage, carry out the warming-up operation thoroughly. For details, see
"ENGINE WARM-UP OPERATION (3-167)".