Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual, Page: 428 / 458

MACHINE READY FOR INSTALLATION OF ATTACHMENT ATTACHMENTS AND OPTIONS
6–30
WHEN USING GENERAL ATTACHMENTS SUCH AS CRUSHER:
If the pilot monitor in the working mode does not display ATT
for the attachment mode, press working mode selector switch
(1) and set to the attachment mode as follows.
q
Even if P, E, or L mode are selected, the attachment is not
operated.
1. Press working mode selector switch (1) or press switches
F3 or F4 to select attachment mode ATT/P or ATT/E.
2. With attachment mode ATT/P or ATT/E highlighted in yel-
low, do one of the following to accept the selection.
q
Keep working mode selector switch (1) pressed.
q
Leave as it is for 5 seconds.
q
Press switch F6.
q
On the user menu attachment setting, it is possible to
make the attachment mode inactive.
q
When using the attachment mode, check that the
attachment mode is active before starting operations.
Precautions when using
q
Check that the stop valve is in the FREE position.
q
Check that the working mode is ATT/P mode or ATT/E mode.
For details of the path of the oil, see "HYDRAULIC CIRCUIT (6-18)".
q
For other precautions when handling the attachment, follow the instruction manual from the attachment manu-
facturer and use the attachment correctly.