Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual, Page: 380 / 458

MAINTENANCE SCHEDULE TABLE MAINTENANCE
4–70
6. Set lock lever to FREE position (F), then operate the work
equipment control levers and the attachment control pedal
(if equipped) fully to the front, rear, left, and right to release
the pressure in the control circuit.
7. Set the lock lever to the LOCK position, then turn the start-
ing switch to the OFF position.
8. Insert the lock pin in position (a) so that the attachment con-
trol pedal cannot be operated.
(if equipped)
CHECK ALTERNATOR
CHECK ALTERNATOR:ALL-AKK0-360K00A
Contact your Komatsu distributor to have the alternator checked.
If the engine is started frequently, have this inspection carried out every 1000 hours.
CHECK ENGINE VALVE CLEARANCE, ADJUST
CHECK ENGINE VALVE CLEARANCE, ADJUST:ALL-A700-27DK00A
Special tools are needed for inspection and maintenance. Contact your Komatsu distributor.