Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual

Page: 205 / 458

OPERATION EXPLANATION OF COMPONENTS
3–135
WHILE REGENERATION IS NOT BEING PERFORMED: SETTING FOR REGENERATION DISABLE
(When KDPF regeneration monitor is not lighting on standard
screen)
1. On the standard screen, press switch F6.
2. Operate switches F1 and F2 to select KDPF regeneration
menu (C) and display the KDPF regeneration screen.
3. Select regeneration disable and press switch F6, and the
regeneration function is disabled and the regeneration can-
not be performed.
REMARK
q
If the regeneration is disabled, KDPF regeneration disable
monitor (2) on the standard screen is hatched.
q
The regeneration disable setting is cancelled if starting
switch is turned to the OFF position. If the automatic regen-
eration needs to be kept disabled, perform the above proce-
dure each time you start the engine.
q
Even if the regeneration disable is set, if the regeneration is
performed to protect the system, the regeneration lamp
may light up, but this is not trouble. In addition, if the regen-
eration is performed to protect the system, the regeneration
disable can not be operated.
q
When the regeneration is performed to protect the system,
the exhaust temperature is lower than that of when the
regeneration is performed to burn soot, and is about the
normal exhaust gas temperature.