Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual

Page: 213 / 458

OPERATION MACHINE OPERATIONS AND CONTROLS
3–143
CHECKS BEFORE STARTING
Checks Before Starting:ALL-3340-015A00A
Always check the items in this section before starting the engine each day.
REFUELLING PUMP
REFUELLING PUMP:PC220_KU-AD5G-100K00A
k
WARNING
Only for use with diesel fuel.
Do not use for, or with petrol (gasoline) and solvents with flashpoint <55° C.
When adding fuel, never spill the fuel or let it overflow. It will cause a fire.
If any fuel has spilled, wipe it up completely. If the fuel has spilled over soil or sand, remove that soil or
sand.
Fuel is highly flammable and dangerous. Never bring flames near fuel.
k
CAUTION
Ensure that the machine is parked on level ground during refuelling operation.
Do not leave machine unattended during refuelling and monitor.
Following any over filling or spillage of fuel, inspect machine to ensure no fuel remains near electrical or
high temperature components.
Do not run refuel pump dry. Monitor fuel level in barrel during refuelling to prevent pump running dry.
The fuel pump is protected by an in-line blade fuse (15A). If the pump fails to function — check fuse.
Ensure the strainer on the hose end is clean.
When not in use, fully close the hose strainer valve cap (H) to prevent leakage or spillage.
If there is any malfunction of the refuel automatic shut-off system, consult your Komatsu Distributor and
do not use the system until the problem is rectified.