Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual

Page: 202 / 458

EXPLANATION OF COMPONENTS OPERATION
3–132
OPERATION PROCEDURE OF MANUAL STATIONARY REGENERATION
k
CAUTION
Exhaust gas temperature may increase higher than the
current models during KDPF regeneration. Avoid getting
near the exhaust pipe outlet to prevent being burnt. Also,
keep flammables away from the exhaust pipe outlet to pre-
vent a fire.
The manual stationary regeneration can be performed while
KDPF soot accumulation monitor (1) is lighting.
1. Move the machine to a safe place and stop it with engine
running.
2. Check that there is no person or combustible matter around
the machine (particularly in the direction of the exhaust gas
flow).
3. Set the lock lever to LOCK position (L).
4. Set the fuel control dial to low idle (MIN) position.
5. Press switch F6 to display the KDPF regeneration screen.
6. Select manual stationary regeneration, check again that
there is no person or combustible matter around the
machine, then press switch F6.
If the machine needs to be moved again to secure safety,
move it to a safe place and repeat the procedure from Step
1.