Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual

Page: 100 / 458

EXPLANATION OF COMPONENTS OPERATION
3–30
KDPF REGENERATION STOP MONITOR
KDPF REGENERATION STOP MONITOR:PC-A9HN-043K00A
This monitor (13) lights up when KDPF is set not to be regener-
ated.
REMARK
Even if no regeneration of KDPF is set, when the manual sta-
tionary regeneration is necessary, accumulated soot monitor of
KDPF lights up.If it lights up, cancel no regeneration setting
and carry out manual stationary regeneration.
For the procedures of cancellation of regeneration disable set-
ting, and setting of manual stationary regeneration, see "Han-
dling KDPF (3-129)".
ECO GUIDANCE
ECO GUIDANCE:PC-Q1L3-043K00A
The guidance for energy saving operation to reduce the fuel
consumption may be displayed during operation.
The details of the guidance are as follows:
IDLING STOP GUIDANCE (A)
If no operation is performed for more than five minutes, and the
engine is idling, the idling stop message is displayed on the
monitor. When waiting for work or stopping work for a short
periods, stop the engine to reduce unnecessary fuel consump-
tion.
q
The idling stop message goes out if any lever is operated
again or switch F5 is pressed.