Chapter 6
KGP-920
Various Navigation
6-18
93121662-00
6.6 Setting an anchor position
After arriving at your destination, it is possible to drift from the anchor position due to a tide or wind.
Once the anchor position is stored in memory, it is easy to check the distance and bearing moved from
the anchor position.
6.6.1 String an anchor position
You can set the anchor position from the
A
(NAV1),
B
(NAV2),
C
(NAV3) or
D
(PLOT) screen.
The following operations allow you to store and specify the current position as the anchor position. The
anchor position is registered to memory number 397 along with the comment ( ANCW).
(1) Press [
MODE
] key until
B
(NAV2),
C
(NAV3) or
D
(PLOT) screen appears.
(2) Press [
SEL
] key until page 5 screen appears.
(3) Press [ ] or [ ] key to move cursor to the letters “
ANCW
”.
(4) Press [
ENT
] key. Current position is registered and selected as the anchor position.
6.6.2 Recalling anchor position
You can check the anchor position on any of
A
(NAV1),
B
(NAV2),
C
(NAV3) and
D
(PLOT) screens
during anchoring.
(1) Press [
MODE
] key until
B
(NAV2),
C
(NAV3) or
D
(PLOT) screen appears.
(2) Press [
SEL
] key to display anchor position data. The anchor position and comment "
ANCW
" are
displayed.
Cursor
ANCW
B
(NAV2) screen
C
(NAV3) screen
D
(PLOT) screen
Anchor position
Anchor positions will be displayed
in the 2nd, 3rd and 4th pages.
Anchor positions will be displayed
in the 2nd, 3rd and 4th pages.
Anchor position will be displayed
in the 2nd page.
