Chapter 6
KGP-920
Various Navigation
6-10
93121662-00
6.4 Storing and erasing routes
6.4.1 Storing your route
• Up to 20routes and 230 waypoints can be registered for one route.
NOTE: 230 waypoints are the maximum number of waypoints the system can handle.
In case you have registered 230 waypoints for one route only, you cannot register any waypoint
to other routes. To store the route, you first need to register the waypoint on route in the menu,
"1. WAYPOINT".
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
(2) Press [
2
] key to select “
2:ROUTE
”.
(3) Press [
1
] key to select “
1: RTE EDIT
”. Route Input screen is displayed.
(4) Enter a route number (01 to 20) using numeric keys.
(5) Press [
ENT
] key to store the route number.
(6) Press [ ] key to move cursor to the forward(
→
)or backward(
←
) route setup column.
(7) Press [
SEL
] key to select the forward or backward route navigation.
(8) Press [ ] key to move cursor to the waypoint number column.
(9) Enter a waypoint number (200 to 399) of the route using numeric keys. (You can check its memory
data on the screen.)
(10) Press [
ENT
] key to store the waypoint number.
(11) Repeat (9) and (10) steps to set another waypoint of the route.
NOTE:
Press to backspace the
cursor to correct an input
error.
NOTE:
Press to clear incorrect
Input. You can reenter
Numeric data.
CLR
Total number of points on the route
Sequence of route (Cursor)
Data registered to the specified
number will be displayed.
Route number
Cursor
Waypoint
number
