KGP-920
Chapter 6
Various Navigation
93121662-00
6-15
6.5.6 Switching between distance and time to go
When you select the “
DIST
” (Distance to WPT) or “
TDIST
” (Total distance) on NAV1, NAV2 or NAV3
screen in route navigation, the respective “
TTG
” (Time to go to WPT) or “
T.TTG
” (Total time to go) is
shown.
(1) Press [
MODE
] key until
B
(NAV2),
C
(NAV3) or
D
(PLOT) screen appears.
(2) Press [
SEL
] key until page 2 screen appears.
(3) Press [ ] key to display “
DST
” .
(4) Press [ ] key to display “
TDST
”.
(1) Press [
MODE
] key until
B
(NAV2),
C
(NAV3) or
D
(PLOT) screen appears.
(2) Press [
SEL
] key until page 4 screen appears.
(3) Press [ ] key to display “
TTG
” .
(4) Press [ ] key to display “
T.TTG
”.
NOTE: “DIST” shows the distance to the next waypoint.
“TDIST” shows the total distance to the final destination
.
“TTG” shows the time to the next waypoint.
“T.TTGT” shows the total time to the final destination
.
Time to go to WPT
Page 4.
Total time to go to WPT
Distance to WPT
Page 2.
Total distance to WPT
