KLA Tencor P-16+ User Manual Download Page 33

Page: 33 / 456

0142530-000 AB

KLA-Tencor Confidential

2-3

Friday, March 13, 2009

KLA-Tencor P-16+ / P-6 User’s Guide

Basic Skills - Starting the Profiler Application

eliminary

4. The E10 state is not being tracked by the software, so it can be left at the

default value.

5. Click on Logon

TARTING

THE

ROFILER

PPLICATION

Introduction

The Profiler application is the interface with the P-16+/P-6 Profiler system from
which the scan functions are performed and viewed.

Profiler Start-Up Procedure

Use the trackball to locate the Profiler icon with the screen cursor. Double-click
the

Profiler

icon to initiate startup of the P-16+ / P-6 Profiler system. (See

Figure

2.2

Figure 2.2

Program Icons

Step 1

When the boot cycle

is complete and the log on is
complete, double-click the

Profiler

icon to initiate

system start-up.

Summary of Contents for P-16+









































































































































































































































































































































































































































































Search results

Summary of Contents for P-16+

Reviews:

Brands by name

Popular brands

KLA Tencor P-16+, User Manual

Search results

Summary of Contents for P-16+

Reviews:

Brands by name

Popular brands