manualshive.com logo in svg

KLA Tencor P-16+, User Manual

Share
Download
KLA Tencor P-16+ User Manual Download Page 147

0142530-000 AB

KLA-Tencor Confidential

3-99

3/13/09

KLA-Tencor P-16+ / P-6 User’s Guide

Scan Recipes - Feature Find

Diagnostic Options

3

Listed below are options located in the Diagnostic options window.

Scan Options

3

This is a set of miscellaneous scan related options.

Linearity Calibration Only – Diagnostic Options

3

Table 3.28

Diagnostic Options 

Option

Description

No Motion Scan

During the scan, data is collected but the stage does not 
move.

NOTE

:

 This scan is only available in 2D.

Do Not Null Before 
Scan

No movement of the elevator (for nulling) occurs before 
the scan is performed and the data collected. 

Table 3.29

Standard - Diagnostic Options 

Option

Description

No Back Scan Before 
Scan

Back Scan is a technique where, immediately prior to 
the scan, the stage moves the scan start position back 
and begins the scan nulling and movement. The 
mechanical portion of the system has an opportunity 
to settle before actually reaching the beginning of the 
data collection.
This option prevents the Back Scan positioning from 
taking place.

No Noise Filter

This prevents postprocessing of the scan data with 
cutoff filters.

No Leveling

This prevents postprocessing data leveling of scan 
data. 

No Linearity Correction

Only used during the Linearity Calibration.

Table 3.30

Linearity Calibration Only – Diagnostic Options

Option

Description

Use Raw Data

Raw data from the scan is presented with no 
postprocessing; without scaling to the measurement 
range.

NOTE: 

This option has no useful application apart from 

the Linearity Calibration. 

No Stylus Arc 
Correction

Data from the scan is presented with no postprocessing 
arcal correction.

NOTE: 

This option has no useful application apart from 

the Linearity Calibration. 

Summary of Contents for P-16+









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands