manualshive.com logo in svg

KLA Tencor P-16+, User Manual

Share
Download
KLA Tencor P-16+ User Manual Download Page 172

XY View Screen - Using Die Grid Navigation (Optional Feature, P-16+ only)

KLA-Tencor P-16+ / P-6 User’s Guide 

4-24

KLA-Tencor Confidential

0142530-000 AB

3/13/09

16.

When the system completes its check, the die grid is applied. The Teach Die 
Grid screen changes its die grid navigation window to reflect the current die grid 
configuration on the wafer. (See 

Figure 4.20

.) The taught die appears in dark 

blue. The operator is prompted to click 

OK

 to save the die grid.

Figure 4.19

Teach Die Grid - With Feature in Navigation Window

The feature appears in 
the navigation window, 
above the text explaining 

the current system 
activity.

Figure 4.20

Teach Die Grid - Die Grid Simulation in Navigation Window

The die grid simulation is 
visible in the die grid 
navigation area with the 
taught die highlighted.

The die is presented as a 
large rectangle with the 
feature location and size 
indicated by a boundary 
box in the relative location 
of the feature on the die.

Summary of Contents for P-16+









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands