Keysight P9241, Scpi Programmer'S Manual

Page: 122 / 1344

122 Keysight P9241/42/43A Oscilloscopes SCPI Programmer's Guide
5
Commands Quick Reference
:SBUS<n>:UART:TRIGger
:DATA <value> (see
page 768
)
:SBUS<n>:UART:TRIGger
:DATA? (see
page 768
)
<value> ::= 8-bit integer from
0-255 (0x00-0xff) in decimal,
<hexadecimal>, <binary>, or
<quoted_string> format
<hexadecimal> ::= #Hnn where n
::= {0,..,9 | A,..,F} for
hexadecimal
<binary> ::= #Bnn...n where n ::=
{0 | 1} for binary
<quoted_string> ::= any of the
128 valid 7-bit ASCII characters
(or standard abbreviations)
:SBUS<n>:UART:TRIGger
:IDLE <time_value>
(see
page 769
)
:SBUS<n>:UART:TRIGger
:IDLE? (see
page 769
)
<time_value> ::= time from 1 us
to 10 s in NR3 format
:SBUS<n>:UART:TRIGger
:QUALifier <value>
(see
page 770
)
:SBUS<n>:UART:TRIGger
:QUALifier? (see
page 770
)
<value> ::= {EQUal | NOTequal |
GREaterthan | LESSthan}
:SBUS<n>:UART:TRIGger
:TYPE <value> (see
page 771
)
:SBUS<n>:UART:TRIGger
:TYPE? (see
page 771
)
<value> ::= {RSTArt | RSTOp |
RDATa | RD1 | RD0 | RDX |
PARityerror | TSTArt | TSTOp |
TDATa | TD1 | TD0 | TDX}
:SBUS<n>:UART:WIDTh
<width> (see
page 772
)
:SBUS<n>:UART:WIDTh?
(see
page 772
)
<width> ::= {5 | 6 | 7 | 8 | 9}
Table 31 :SBUS<n>:UART Commands Summary (continued)
Command Query Options and Query Returns
Table 32 :SBUS<n>:USBPd Commands Summary
Command Query Options and Query Returns
:SBUS<n>:USBPd:SOURce
<source> (see
page 774
)
:SBUS<n>:USBPd:SOURce
? (see
page 774
)
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
:SBUS<n>:USBPd:TRIGge
r <mode> (see
page 775
)
:SBUS<n>:USBPd:TRIGge
r? (see
page 775
)
<mode> ::= {PSTart | EOP | SOP |
SPRime | SDPRime | SPDebug |
SDPDebug | HRST | CRST | CRCerror
| PERRor | HEADer}
:SBUS<n>:USBPd:TRIGge
r:HEADer <type> (see
page 776
)
:SBUS<n>:USBPd:TRIGge
r:HEADer? (see
page 776
)
<type> ::= {CMESsage | DMESsage |
EMESsage | VALue}