Keysight P9241, Scpi Programmer'S Manual

Page: 893 / 1344

:TIMebase Commands
28
Keysight P9241/42/43A Oscilloscopes SCPI Programmer's Guide 893
:TIMebase:REFerence
(see page 1196 )
Command Syntax
:TIMebase:REFerence <reference>
<reference> ::= {LEFT | CENTer | RIGHt | CUSTom}
The :TIMebase:REFerence command sets the time reference to:
• LEFT — one division from the left side of the screen.
• CENTer — the center of the screen.
• RIGHt — one division from the right side of the screen.
• CUSTom — lets you use the :TIMebase:REFerence:LOCation command to place
the time reference location at a percent of the graticule width (where 0.0 is the
left edge and 1.0 is the right edge).
The time reference is the point on the display where the trigger point is
referenced.
Query Syntax
:TIMebase:REFerence?
The :TIMebase:REFerence? query returns the current display reference for the main
window.
Return Format
<reference><NL>
<reference> ::= {LEFT | CENT | RIGH | CUST}
See Also • "Introduction to :TIMebase Commands" on page 888
• ":TIMebase:REFerence:LOCation" on page 894
• ":TIMebase:MODE" on page 889
Example Code
myScope.WriteString ":TIMebase:REFerence CENTer" ' Set reference to
center.
See complete example programs at: Chapter 38 , “Programming Examples,”
starting on page 1205