Keysight P9241, Scpi Programmer'S Manual

Page: 4 / 1344

4 Keysight P9241/42/43A Oscilloscopes SCPI Programmer's Guide
• Chapter 12 , “:DEMO Commands,” starting on page 291, describes commands
that control the education kit demonstration signals that can be output on the
oscilloscope's Demo 1 and Demo 2 terminals.
• Chapter 13 , “:DISPlay Commands,” starting on page 295, describes commands
that control how waveforms, graticule, and text are displayed and written on
the screen.
• Chapter 14 , “:DVM Commands,” starting on page 317, describes commands
that control the digital voltmeter analysis feature.
• Chapter 15 , “:EXTernal Trigger Commands,” starting on page 323, describes
commands that control the input characteristics of the external trigger input.
• Chapter 16 , “:FRANalysis Commands,” starting on page 329, describes
commands that control oscilloscope functions associated with the Frequency
Response Analysis (FRA) feature, which is available is with the license-enabled
built-in waveform generator).
• Chapter 17 , “:FUNCtion<m> Commands,” starting on page 345, describes
commands that control math waveforms.
• Chapter 18 , “:HCOPY Commands,” starting on page 387, describes commands
that set and query the selection of hardcopy device and formatting options.
• Chapter 19 , “:LISTer Commands,” starting on page 391, describes commands
that turn on/off the Lister display for decoded serial data and get the Lister
data.
• Chapter 20 , “:MARKer Commands,” starting on page 395, describes commands
that set and query the settings of X-axis markers (X1 and X2 cursors) and the
Y-axis markers (Y1 and Y2 cursors).
• Chapter 21 , “:MEASure Commands,” starting on page 417, describes
commands that select automatic measurements (and control markers).
• Chapter 22 , “:MTESt Commands,” starting on page 499, describes commands
that control the license-enabled mask test feature.
• Chapter 23 , “:RECall Commands,” starting on page 533, describes commands
that recall previously saved oscilloscope setups, reference waveforms, or
masks.
• Chapter 24 , “:SAVE Commands,” starting on page 543, describes commands
that save oscilloscope setups, screen images, and data.
• Chapter 25 , “:SBUS<n> Commands,” starting on page 573, describes
commands that control oscilloscope functions associated with the serial
decode bus and serial triggering.
• Chapter 26 , “:SEARch Commands,” starting on page 785, describes commands
that control oscilloscope functions associated with searching for waveform
events.
• Chapter 27 , “:SYSTem Commands,” starting on page 861, describes
commands that control basic system functions of the oscilloscope.
• Chapter 28 , “:TIMebase Commands,” starting on page 887, describes
commands that control all horizontal sweep functions.