Keysight P9241, Scpi Programmer'S Manual

Page: 1115 / 1344

Obsolete and Discontinued Commands
33
Keysight P9241/42/43A Oscilloscopes SCPI Programmer's Guide 1115
:MEASure:TSTOp
(see page 1196 )
Command Syntax
:MEASure:TSTOp <value> [suffix]
<value> ::= time at the stop marker in seconds
[suffix] ::= {s | ms | us | ns | ps}
The :MEASure:TSTOp command moves the stop marker (X2 cursor) to the
specified time with respect to the trigger time.
Query Syntax
:MEASure:TSTOp?
The :MEASure:TSTOp? query returns the time at the stop marker (X2 cursor).
Return Format
<value><NL>
<value> ::= time at the stop marker in NR3 format
See Also • "Introduction to :MARKer Commands" on page 397
• "Introduction to :MEASure Commands" on page 432
• ":MARKer:X1Position" on page 401
• ":MARKer:X2Position" on page 404
• ":MARKer:XDELta" on page 406
• ":MEASure:TDELta" on page 1110
• ":MEASure:TSTArt" on page 1114
NOTE
The short form of this command, TSTO, does not follow the defined Long Form to Short Form
Truncation Rules (see page 1198 ). The normal short form "TST" would be the same for both
TSTArt and TSTOp, so sending TST for the TSTOp command produces an error.
NOTE
The :MEASure:TSTOp command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :MARKer:X2Position command (see page 404 ) instead.