309 Cannot initiate, voltage and current in fixed mode
Cannot initiate transient generator. Either the voltage or current function is set to Fixed mode.
310 The command is not supported by this model
This instrument either does not have the hardware capability or the options required to support this
command.
314 Time of day clock has stopped
The time of day clock has stopped . Replace the internal battery. See service section.
315 Settings conflict error
A data element could not be programmed because of the present instrument state.
320 Firmware update error
This may be due to the instrument hardware not being able to support the firmware version.
Command Errors (these errors set Standard Event Status register bit #5)
-100 Command error
Generic syntax error.
-101 Invalid character
An invalid character was found in the command string.
-102 Syntax error
Invalid syntax was found in the command string. Check for blank spaces.
-103 Invalid separator
An invalid separator was found in the command string. Check for proper use of , ; :
-104 Data type error
A different data type than the one allowed was found in the command string.
-105 GET not allowed
A group execute trigger is not allowed in a command string.
-108 Parameter not allowed
More parameters were received than were expected.
-109 Missing parameter
Fewer parameters were received than were expected.
-110 Command header error
An error was detected in the header.
6 SCPI Programming Reference
299
Keysight N6900/N7900 Series Operating and Service Guide
Summary of Contents for N6900 Series
