![background image](http://html1.mh-extra.com/html/kayo-moto/s200/s200_service-manual_3710754054.webp)
3 Regular inspection and adjustment
3-
10
2
Front and rear brake pump combination
〈
Liquid volume
〉
Check the amount of brake fluid. When
the brake fluid level decreases to near
the lower limit of 1 (LOWER), an alarm
will be displayed on the instrument
panel. At this time, the vehicle will no
longer be able to use. It is necessary to
check the leakage of the brake pump,
brake pipe, and various connections. If
the inspection is normal, it is necessary
to check the wear of the brake disc and
brake pad. If there is damage or wear
below the limit of use, please replace it.
It is also necessary to inspect these items
before each use of the vehicle
Take off the oil cup cover 2
Replenish the brake fluid recommended
by Kayo until it reaches the upper limit
line
Attention
When replenishing brake fluid, dust and
water should not be mixed in.
In order to prevent chemical changes,
please use the specified brand of brake
fluid.
Because brake fluid can damage the
plastic and rubber surfaces, please do
not splash it onto these components.
Turn the steering lever slightly to the left
and right, and take off the oil cup cover after
the brake pump assembly is in a horizontal
state.
1
Summary of Contents for S200
