![background image](http://html1.mh-extra.com/html/kayo-moto/s200/s200_service-manual_3710754060.webp)
3 Regular inspection and adjustment
3-
16
3.8 Throttle inspection
Check the free travel of throttle pedal 1
Gap: 2-5 mm
When the gap is not within the specified
range, adjust the gap.
Loosen the throttle cable lock nut 2.
Rotate the adjuster to adjust the free travel
of the accelerator pedal.
After adjustment, tighten the locking nut 2.
If the adjustment of the regulator still cannot
reach the specified gap or if the action is still
not flexible, then replace the throttle cable
with a new one.
If the height of the throttle pedal decreases
or is too high, adjust the limit bolt 3.
3.9
Instrumentation
Inspection instrument
When the entire vehicle system is first
powered on (or after the first instrument
replacement)
and the engine is not working,
the speed should be in the zero position.
Start the engine and pay attention to whether
there is a change in the speed value
indication. If there is no change, it should be
repaired in time.
2
4
3
Summary of Contents for S200
