![background image](http://html1.mh-extra.com/html/kayo-moto/s200/s200_service-manual_3710754171.webp)
6 Vehicle chassis
6- 9
Removal of brake pads
Loosen one fastening bolt
Rotate brake caliper 1
Remove the brake pads 2
Check
Measure the thickness of brake pad friction
layer 2. When the thickness of brake pad
friction layer 2 is less than or equal to 1 mm,
both brake pads should be replaced with
new ones at the same time.
Installation
Installation is carried out in reverse order of
disassembly
Remove the brake disc
Remove the front wheel
Remove the brake caliper
Remove the brake disc 3 and front wheel
mount 4 together from the vehicle
Remove the brake disc 3
Check
Front brake disc thickness: If it is less than
3.0mm, replace it with a new brake disc
Installation
Install the brake disc
Brake disc fixing bolt torque: 14N
•
m~17N
•
m
Disassembly of brake pedal
Remove bolt 5
Remove spring 6
Remove brake pedal 7
Installation
Installation is carried out in reverse order of
disassembly
Attention
:
The direction of the oil pipe on the vehicle
body must be arranged according to the
cables and wires in the first chapter, and the
smooth flow of the brake oil circuit must be
ensured
When the brake system assembly is
installed, the braking force must be checked.
2
1
3
4
6
5
7
Summary of Contents for S200
