![background image](http://html1.mh-extra.com/html/kayo-moto/s200/s200_service-manual_3710754063.webp)
Zhejiang Kayo Motor Co., Ltd.
4-5
2
contain coolant, engine oil, and fuel to protect the environment. During
installation, the coolant and engine oil should be replenished as required.
Tightening torque
Engine bracket mounting bolts GB5787 M10×1.25×160 55~66N·m
4.1 Fuel system
Disassembly
Remove the rear shelf tarpaulin and rear
shelf (→ The second chapter vehicle body
covering parts)
Remove the mounting bolt 1
Loosen the oil level sensor plug-in 2
Remove fuel pipe 4
Remove fuel tank 3
Attention
Gasoline is very easy to catch fire, so
smoking and fire are strictly prohibited in
the workplace.
Not only open flames, but also high
attention should be paid to electric
sparks.
In addition, due to the risk of explosion
after gasoline evaporation (vaporization),
operations should be carried out in a well
ventilated area.
When disassembling the fuel tank, if
there is still fuel inside, first turn off the
fuel tank switch to prevent fuel leakage,
and then remove the fuel tank.
Installation
Installation is carried out in reverse order of
disassembly
The connector is required to be inserted in
place and there is a noticeable "da" sound
when installed in the place.
Check the integrity of each oil pipe during
installation.
4.2 Intake system
Disassembly
Remove the rear shelf tarpaulin and rear
shelf (→ The second chapter vehicle body
covering parts)
Loosen clamp 5
Remove the installation bolt 6
Pull off oil pipe 7
Remove carburetor 8
1
Summary of Contents for S200
