![background image](http://html1.mh-extra.com/html/kayo-moto/s200/s200_service-manual_3710754116.webp)
52
5 Engine
5-
Valve spring outer race C
Valve spring inner seat ring H
Valve inner and outer springs D
Valve spring upper seat E
Locking clip F, sealing ring end G
Measure the clearance between the
valve and valve guide
·
Measure the outer diameter of each
valve stem and the inner diameter of each
valve guide.
·
Subtract the outer diameter of the valve
stem from the corresponding inner
diameter of the valve guide to obtain the
clearance between them.
★
If the gap exceeds the service limit,
replace the cylinder head.
Valve and valve guide clearance
Standard: Exhaust valve (0.03-0.055)
mm
Intake valve (0.01-0.035) mm
Service limit: exhaust valve 0.08mm
Inlet valve 0.06mm
★
If the height of the valve spring
exceeds the service limit, replace the
valve spring kit.
Valve Spring Kit Spring Standard:
Valve inner spring height: 39.2
Valve outer spring height: 44.85
Service limit:
Valve inner spring height: 38
Valve outer spring height: 43.65
Summary of Contents for S200
