Zhejiang Kayo Motor Co., Ltd.
5-
19
Check the oil pump
·Remove the oil pump.
·Visually inspect the oil pump driven
wheel, inner and outer rotors, and oil
pump cover.
★
If there is damage or uneven wear,
please replace it. Use a feeler gauge to
check the gap A between the inner and
outer rotors. Measure the gap between
the highest point of the inner rotor and
the highest point of the outer rotor.
★
If the measured value exceeds the
usage limit, please replace the inner and
outer rotors.
·Clearance between inner and outer
rotors
Standard: (0.05-0.15) mm
Service limit
:
0.2mm
·Use a feeler gauge to check the gap A
between the outer rotor and the oil
pump body.
★
If the measured value exceeds the
service
limit,
please
replace
the
lubricating oil pump and the inner and
outer rotors.
·Clearance between outer rotor and oil
pump body
Standard: (0.12-0.21) mm.
Service limit
:
0.26mm
·Use a feeler gauge to check the gap A
between the outer rotor end face and the
lubricating oil pump body.
★
If the measured value exceeds the
service
limit,
please
replace
the
lubricating oil pump and the inner and
outer rotors.
·Clearance between outer rotor end face
and lubricating oil pump body
Standard: (0.05-0.11) mm.
Service limit
:
0.16mm
Summary of Contents for S200
