Zhejiang Kayo Motor Co., Ltd.
5- 93
Apply lubricating oil to the oil ring machine and lining ring. Assemble the oil ring liner ring A in the
bottom of the piston ring groove, so that both ends B
butt joint.
Assemble the oil ring scraper ring. One piece is
above the lining ring, and the other piece is below it.
○ Grasp the railing with your thumb. But it is only
enough to put the handrail on the piston or insert the
rail into the bottom piston ring groove.
○ Or press the rail into the bottom piston ring.
Apply lubricating oil on piston ring
Do not mix the first and second rings, assemble the first ring A with the "R" mark B facing upwards.
Assemble the second ring C with the "RN"
mark D facing upwards.
Attention
:
the openings of two adjacent rings
of the piston ring are staggered by 120 °, and
the piston ring is staggered from the inlet side
and the direction of the piston pin
Apply lubricating oil to the piston pin.
Assemble the piston with the "IN" mark A
facing the air inlet side.
Assemble the piston pin
Summary of Contents for S200
