Zhejiang Kayo Motor Co., Ltd.
3- 11
Rear brake disc, brake pad (brake pad
wear)
Check the wear of the brake pad
If the wear has reached the wear limit,
replace the brake pad
Attention
The brake pads need to be replaced as a
complete set
Inspection and replacement of brake discs.
Check the sliding surface of brake disc 1 for
wear or damage. If the current brake disc
thickness is ≤ 3.0mm, replace the brake disc.
Rear brake disc service limit thickness:
3.0mm
Check the minimum thickness of brake
friction plate 2.
Minimum friction plate thickness ≥ 1 mm.
If it is less than the minimum friction plate
thickness, please replace it with a new brake
friction plate.
Check if there is any damage or crack on the
brake friction plate. If there is any damage
or crack, please replace it with a new brake
friction plate.
Oil change (replacement of brake fluid)
Brake fluid is replaced once a year
2
1
Summary of Contents for S200
