![background image](http://html1.mh-extra.com/html/kayo-moto/s200/s200_service-manual_3710754081.webp)
5 Engine
5-8
5.2.5 Valve clearance
Check valve clearance
·
Disassemble
:
Cylinder head cover
Right decorative cover bolt A
Right decorative cover B
Timing observation hole cover C
·
Disassemble
Oil passage pipe and pressure spring A
·Place the T-shaped sleeve on the bolt of the
magneto rotor and rotate the crankshaft
clockwise until the "T" marking line A on
the magneto rotor aligns with the notch B
on the right crankcase cover, as shown in
the figure: it is the top dead center of
cylinder compression.
★
Attention
:
Unable to rotate the crankshaft
counterclockwise
·
Confirm that the large circular hole A of
the driven wheel for cylinder head timing
is above the engine cylinder head surface,
and the two small holes B are flush with
the cylinder head plane
Attention
The valve clearance can only be checked
when the engine has cooled to room
temperature.
A
B
Summary of Contents for S200
