KaVo ORTHOPANTOMOGAPH OP 2D, Service Manual

Page: 97 / 128

5. S2terminal and service commands
ORTHOPANTOMOGAPH OP 2D 87
NOTICE!
The " still " command, described later, generates x-rays
and activates the CCD sensor but the rotating unit
does not move.
expcnt exposure counter, use [<clear>] option to clear it
Displays the total number of exposures taken with the
tubehead.
To zero the exposure counter enter clear,
____________________________________________
>expcnt clear
____________________________________________
and then press Enter .
NOTICE!
Always zero the exposure counter when the tubehead
is replaced.
help display info on command (‘help [cmd]’ or ‘h [cmd]’)
Displays the service command list and information
about the commands.
imagecalib takes a calibration image for calibrating the DSD
Creates a technical image which is then used by the im-
age capturing driver for image correction.
This function can also be carried out using the unit GUI.
See the section "Calibrating the CCD sensor" in the
installation manual.
ip con fi gure ip address
Displays the current IP address of the unit.
To change the IP address enter the new one,
____________________________________________
> ip aaa.bbb.ccc.ddd (the new IP address)
____________________________________________
and then press Enter .