![background image](http://html1.mh-extra.com/html/karcher/cwb-3/cwb-3_original-operating-instructions_654955030.webp)
30
English
Dosing pumps
The cleaning and care agents are added to the water by the dos-
ing pumps located in pillar 2.
The assignment of the dosing pumps is by way of example only.
Dosing pumps 1-4 are assigned as shown in a standard system.
7 different cleaning and care agents can be selected for dosing
pumps 5-8.
1
Dosing pump
2
Shampoo dosing pump
3
Foam dosing pump
4
Wax 1 dosing pump
5
Pre-cleaning dosing pump (insects)
6
Wax 2 dosing pump
7
Wheel cleaner dosing pump (wheel rim foam)
8
Polishing dosing pump
The dosing pumps add cleaning and care agents to the washing
water according to the washing program and the equipment in the
system.
Note
The dosing quantities are adjusted optimally by the installation
technician during initial commissioning. Changes to these set-
tings are not usually necessary.
Labelling of the dosing pumps
Note
The positioning of the dosing pumps is system-dependent.
Adjusting the dosing amount
1
Venting button
2
Venting lever
3
Dosing amount adjustment knob
ATTENTION
Damage to the dosing pump due to dry running
Only adjust the dosing amount when the dosing pump is running.
1. Pull out the dosing amount adjustment knob.
2. Alternately press and release the venting butting while turning
the adjustment knob to the desired setting.
3. Release the venting button.
4. Press in the dosing amount adjustment knob.
Dosing pump Cleaning and care agents
Drying aid
Shampoo
Active foam
Wax 1
Polish 1
Wheel cleaning
Wax 2
Tyre gloss
Insect pre-cleaning
Polish 2
Intensive Basic
Dosing pump Cleaning and care agents
Summary of Contents for CWB 3
Page 555: ......