Kaba Argus HSG-E02, Quick Setup Manual

Page: 70 / 73

70
Fig. 12.3.1-1
Fig. 12.3.1-2
30656E--
Technical documentation
Argus HSG
12.3 Service tasks
12.3.1 Service task - replace sensors
Sensor tting
Setscrew with hexagon socket
Sensor panel
Button cell
Clip closure
Sensor connection
Replace sensor panel
Disconnect voltage to unit.
Unscrew the covering plate.
Using an allen key, loosen the two setscrews on
the sensor ttings.
Loosen the sensor connection.
Remove the sensor from the sensor tting.
Insert a new sensor and screw it on to the sensor
tting.
Connect the sensor.
Test its function.
Screw on the covering plate.
Replace the button cell
Disconnect voltage to unit.
Unscrew the covering plate.
Press together the clip fastening.
Press out the button cell from the assembly hole.
Loosen the sensor connection.
Remove the button cell.
Insert a new button cell.
Clip fastening snaps shut.
Connect the sensor.
Test its function.
Screw on the covering plate.