Kaba Argus HSG-E02, Quick Setup Manual

Page: 53 / 73

53
Fig. 7.4-1
30656E--
Technical documentation
Argus HSG
7.4 Cabling the components onsite
DANGER
Risk of injury from electric current
Only allow electrical work to be carried out
by specialist personnel.
Comply with the national regulations.
Observe local particularities in energy
provision.
For installation instructions for the mechanical
components, see
Section 9.1.1 Cabling with
individual units.
one oating contact per direction of passage (at
KGB) or control of the card reader in line with the
system supplier’s speci cations
If the identi cation system required additional
feedback signals, further cables are required.
Mains supply line
The mains supply line must be laid in accord-
ance with the line lengths stipulated in the
national or regional connection regulations.
CAN-Bus (external)
Lay together in an empty conduit M 40
All control lines should be exibly designed.