Kaba Argus HSG-E02, Quick Setup Manual

Page: 43 / 73

43 30656E--
Technical documentation
Argus HSG
5 Cleaning
5.1 Safety instructions
DANGER
Electric shock if electrical parts come into
contact with water
Switch off/disconnect the unit before
cleaning.
Do not clean using running water or high-
pressure cleaners in the area around the
drive.
Do not allow any water to penetrate into
the housing.
Recommendations to protect the unit
Apply cleaning agents using a cloth or rag.
Do not use any scouring agents.
Clean polished surfaces in the direction of sand-
ing or polishing.
Follow the instructions of the cleaning agent’s
manufacturer.
5.2 Cleaning intervals
The unit must be cleaned regularly, so that the sur-
faces remain clean and no malfunctions caused by
environmental in uences occur.
In addition, remove dirt from the stainless
steel parts regularly, as rust can also build up
here.
A through clean must be carried out at least
once a year.
Depending on the environmental conditions,
it may become necessary to clean the unit at
shorter intervals.
5.3 Cleaning agents
See adjacent table.
•
•
•
•
Material Cleaning agents
Stainless steel Inox Top, Kaba item No.
19110045
Anodised aluminium Inox Top, Kaba item No.
19110045
plastic-coated surfaces or
plastic surfaces Final Touch, Kaba item
No. 19110043
Hot-dip galvanised steel mild soap water, then rinse
with clean water
Glass Final Touch, Kaba item
No. 19110043
Acrylic glass/polycarbo-
nate antistatic plastic c
protector (KABA item No.
19109707)