Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Page: 92 / 794

DNS Primary and Secondary NMS Configuration
To configure the DNS primary and secondary name server addresses:
1.
Specify the IP address of the DNS primary name server.
host1(config)# aaa dns primary 10.10.10.5
or, for IPv6,
host1(config)# aaa ipv6-dns primary 2001:db8::8001
2.
Specify the IP address of the DNS secondary name server.
host1(config)# aaa dns secondary 10.10.10.6
or, for IPv6,
host1(config)# aaa ipv6-dns secondary 2001:db8::8002
NOTE: The router uses name server addresses exclusively for PPP clients and not
for domain name server resolution.
aaa dns primary
■
Use to specify the IP address of the DNS primary name server.
■
Example
host1(config)# aaa dns primary 10.10.10.5
■
Use the no version to set the corresponding address to 0.0.0.0.
■
See aaa dns
aaa dns secondary
■
Use to specify the IP address of the DNS secondary name server.
■
Example
host1(config)# aaa dns secondary 10.10.10.6
■
Use the no version to set the corresponding address to 0.0.0.0.
■
See aaa dns
aaa ipv6-dns primary
■
Use to specify the IPv6 address of the DNS primary name server.
■
Example
host1(config)# aaa ipv6-dns primary 2001:db8::8001
52 ■
Configuring Name Server Addresses
JUNOSe 11.1.x Broadband Access Configuration Guide