manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 259

■

radius include delegated-ipv6-prefix

radius include delegated-ipv6-prefix

■

Use to include the Delegated-Ipv6-Prefix attribute in Acct-Start or Acct-Stop
messages.

■

You can control inclusion of the Delegated-Ipv6-Prefix attribute by enabling or
disabling this command.

■

For this attribute, the value received from the RADIUS server in the Access-Accept
message is used in the accounting messages.

■

When prefix delegation occurs, an immediate-update (if enabled) message, which
contains the delegated prefix information, is sent to the RADIUS server.

■

When the prefix to be delegated to clients is obtained from the IPv6 local address
server than the RADIUS server and the 

aaa dhcpv6-delegated-prefix

delegated-ipv6-prefix

 command is configured, the delegated prefix is sent to

the RADIUS server in the Delegated-Ipv6-Prefix attribute in the immediate
accounting, Acct-Stop, or Interim-Acct messages.

■

When the prefix to be delegated to clients is allocated from the IPv6 local address
server and the 

aaa dhcpv6-delegated-prefix delegated-ipv6-prefix

 command

is not configured, the delegated prefix is sent to the RADIUS server in the
Framed-Ipv6-Prefix attribute in the immediate accounting, Acct-Stop, or
Interim-Acct messages.

■

For static interfaces, although the prefix configured using the CLI command is
used for DHCPv6 Prefix Delegation instead of the value returned by the RADIUS
server, the immediate accounting, Acct-Stop, or Interim-Acct messages contain
the prefix returned from the RADIUS server. If this attribute is not returned from
the RADIUS server, the immediate accounting, Acct-Stop, or Interim-Acct
messages do not report this attribute.

■

See radius include

■

Example

host1(config)#

radius include delegated-ipv6-prefix acct-start enable

■

Use the 

no

 version to restore the default, disable.

[188] Ascend-Num-In-Multilink

Use the following command to manage the Ascend-Num-In-Multilink attribute.

■

radius include ascend-num-in-multilink

radius include ascend-num-in-multilink

Use to include the Ascend-Num-In-Multilink attribute in Access-Request, Acct-Start,
or Acct-Stop messages.

■

■

You can control inclusion of the Ascend-Num-In-Multilink attribute by enabling
or disabling this command.

CLI Commands Used to Modify RADIUS Attributes

■

219

Chapter 3: Configuring RADIUS Attributes

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands