manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 78

host1(config)#

snmp-server community admin view everything rw

host1(config)#

snmp-server community private view user rw

host1(config)#

snmp-server community public view everything ro

2.

Specify the interface whose IP address is the source address for SNMP traps.

host1(config)#

snmp-server trap-source fastEthernet 0/0

3.

Configure the host that should receive the SNMP traps.

host1(config)#

snmp-server host 10.10.132.93 version 2c 3 udp-port 162 radius

4.

Enable the SNMP router agent to receive and forward RADIUS traps.

host1(config)#

snmp-server enable traps radius

5.

Enable the SNMP on the router.

host1(config)#

snmp-server

NOTE:

For more information about these SNMP commands, see 

JUNOSe System

Basics Configuration Guide

.

radius trap acct-server-not-responding

■

Use to enable or disable SNMP traps when a particular RADIUS accounting server
fails to respond to a RADIUS accounting request.

■

The associated SNMP object is rsRadiusClientTrapOnAcctServerUnavailable.

■

Example

host1(config)#

radius trap acct-server-not-responding enable

■

Use the 

no

 version to return to the default setting, disable.

■

See radius trap acct-server-not-responding

radius trap acct-server-responding

■

Use to enable or disable SNMP traps when a RADIUS accounting server returns
to service after being marked as unavailable.

■

The associated SNMP object is rsRadiusClientTrapOnAcctServerAvailable.

■

This command affects only the current VR context.

■

Example

host1(config)#

radius trap acct-server-responding enable

■

Use the 

no

 version to restore the default, disable.

■

See radius trap acct-server-responding

radius trap auth-server-not-responding

38

■

Configuring RADIUS Authentication and Accounting Servers

JUNOSe 11.1.x Broadband Access Configuration Guide

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands