manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 698

Conversely, QoS profiles and parameter instances configured through the CLI, SNMP,
or the SRC software can be overwritten by any source.

Removing QoS Configurations Referenced by Service Manager

When Service Manager no longer references a QoS configuration, it must be removed
from the service definition.

Figure 30 on page 658 shows the references for QoS configurations.

Figure 30: QoS Configuration Dependency Chain

Service Manager automatically removes QoS profiles and parameter instances. After
removing the QoS profile and parameter instances, Service Manager automatically
removes the following QoS configurations in the following order:

1.

QoS profiles

2.

Scheduler profiles

3.

Queue profiles

4.

Drop profiles

5.

Statistics profiles

Service Manager does not automatically remove the following QoS configurations:

■

Parameter definitions

■

Traffic classes

■

Traffic-class groups

■

QoS-port-type profiles

QoS for Service Manager Considerations

When you specify QoS configurations in Service Manager, the following considerations
apply.

658

■

Referencing QoS Configurations in Service Definitions

JUNOSe 11.1.x Broadband Access Configuration Guide

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands