manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 667

3.

Specify the enduring IP addresses that the DHCP local server can assign from
the local address pool.

host1(config-dhcp-local)#

network 10.20.0.0 255.255.192.0

4.

Specify the router to forward traffic from the IP addresses to destinations on
other subnets.

host1(config-dhcp-local)#

default-router 10.20.32.1

5.

Exit DHCP Local Pool Configuration mode.

host1(config-dhcp-local)#

exit

6.

Configure a loopback interface.

host1(config)#

interface loopback 0

7.

Assign an IP address and mask to the loopback interface.

host1(config-if)#

ip address 10.20.32.1 255.255.255.255

8.

Exit Interface Configuration mode.

host1(config-if)#

exit

9.

Specify a Fast Ethernet port.

host1(config)#

interface fastEthernet 3/0

10.

Create an unnumbered primary IP interface associated with the loopback interface
configured in Steps 6 and 7.

host1(config-if)#

ip unnumbered loopback 0

11.

Configure the primary IP interface to enable dynamic creation of subscriber
interfaces.

host1(config-if)#

ip auto-configure ip-subscriber

12.

Exit Interface Configuration mode.

host1(config-if)#

exit

13.

Repeat Steps 9 through 12 for each Fast Ethernet interface on which you want
to configure dynamic subscriber interfaces. For example:

host1(config)#

interface fastEthernet 3/1

host1(config-if)#

ip unnumbered loopback 0

host1(config-if)#

ip auto-configure ip-subscriber

host1(config-if)#

exit

host1(config)#

interface fastEthernet 3/2

host1(config-if)#

ip unnumbered loopback 0

host1(config-if)#

ip auto-configure ip-subscriber

host1(config-if)#

exit

Configuring Dynamic Subscriber Interfaces

■

627

Chapter 25: Configuring Subscriber Interfaces

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands