manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 281

Chapter 4

Configuring RADIUS Dynamic-Request
Server

This chapter describes the RADIUS dynamic-request server feature on E Series routers.
The following topics describe this feature:

■

RADIUS Dynamic-Request Server Overview on page 241

■

RADIUS Dynamic-Request Server Platform Considerations on page 242

■

RADIUS Dynamic-Request Server References on page 242

■

How RADIUS Dynamic-Request Server Works on page 243

■

RADIUS-Initiated Disconnect on page 243

■

Message Exchange on page 243

■

Configuring RADIUS-Initiated Disconnect on page 245

■

RADIUS-Initiated Change of Authorization on page 245

■

Configuring RADIUS-Initiated Change of Authorization on page 247

■

RADIUS Dynamic-Request Server Commands on page 248

■

Monitoring RADIUS Dynamic-Request Servers on page 250

RADIUS Dynamic-Request Server Overview

The E Series router’s RADIUS dynamic-request server feature provides an efficient
way for you to use RADIUS servers to centrally manage user sessions. The RADIUS
dynamic-request server enables the router to receive the following types of messages
from RADIUS servers:

■

Disconnect messages—Immediately terminate specific user sessions.

■

Change-of-Authorization (CoA) messages—Dynamically modify session
authorization attributes, such as data filters.

NOTE:

The RADIUS dynamic-request server’s support for CoA messages is used by

the Service Manager and by the E Series router’s packet mirroring feature. For
information about using the Service Manager, see “Configuring Service Manager” on
page 641 in this guide. For specific information about using the dynamic-request
server with packet mirroring, see the Configuring RADIUS-Based Mirroring  chapter
in 

JUNOSe Policy Management Configuration Guide

RADIUS Dynamic-Request Server Overview 

■

241

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands