Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Page: 467 / 794

Chapter 16
Monitoring L2TP and L2TP Dial-Out
When you have configured L2TP and L2TP dial-out on your E Series router, you can
monitor the active tunnels and sessions.
NOTE: All of the commands in this chapter apply to both the LAC and the LNS.
L2TP and L2TP dial-out topics are described in the following sections:
■
Monitoring the Mapping for User Domains and Virtual Routers with
AAA on page 428
■
Monitoring Configured Tunnel Groups with AAA on page 430
■
Monitoring Configuration of Tunnel Parameters with AAA on page 432
■
Monitoring Global Configuration Status on E Series Routers on page 433
■
Monitoring Detailed Configuration Information for Specified
Destinations on page 435
■
Monitoring Locked Out Destinations on page 437
■
Monitoring Configured Destination Profiles or Host Profiles on page 437
■
Monitoring Configured and Operational Status of all Destinations on page 440
■
Monitoring Statistics on the Cause of a Session Disconnection on page 441
■
Monitoring Detailed Configuration Information about Specified
Sessions on page 442
■
Monitoring Configured and Operational Summary Status on page 443
■
Monitoring Configured Switch Profiles on Router on page 444
■
Monitoring Detailed Configuration Information about Specified
Tunnels on page 445
■
Monitoring Configured and Operational Status of All Tunnels on page 448
■
Monitoring Chassis-wide Configuration for L2TP Dial-out on page 448
■
Monitoring Status of Dial-out Sessions on page 453
■
Monitoring Dial-out Targets within the Current VR Context on page 454
■
Monitoring Operational Status within the Current VR Context on page 456
■ 427