manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 665

8.

(Optional) Specify the source address of traffic that is destined for the primary
IP interface.

host1(config-subif)#

ip source-prefix 192.168.2.20 255.255.255.0

Figure 26 on page 625 shows the interface stack built for this configuration.

Figure 26: IP over Bridged Ethernet over ATM Dynamic Subscriber Interface Configuration

Configuring Dynamic Subscriber Interfaces over GRE Tunnels

To configure a dynamic subscriber interface in an GRE tunnel configuration by using
packet detection, perform the following steps:

1.

Create a GRE tunnel interface.

For instructions, see the 

Configuration Tasks

 section in 

JUNOSe IP Services

Configuration Guide

 .

2.

Create the primary IP interface by assigning an IP address and mask to the
bridged Ethernet interface (or make it unnumbered).

host1(config-subif)#

ip address 192.168.2.20 255.255.255.0

3.

Configure the packet detect feature and specify that IP automatically detect
packets that do not match any entries in the demultiplexer table.

host1(config-if)#

ip auto-detect ip-subscriber

4.

Configure the primary IP interface to enable dynamic creation of subscriber
interfaces.

host1(config-subif)#

ip auto-configure ip-subscriber

Configuring Dynamic Subscriber Interfaces

■

625

Chapter 25: Configuring Subscriber Interfaces

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands