Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Page: 230 / 794

Table 42: DSL Forum (Vendor ID 3561) VSAs Supported in AAA Access and Accounting
Messages
(continued)
CoA-Request Interim-Acct Acct-Stop Acct-Start Access-Request Attribute Name
Attribute
Number
–
✓ ✓ ✓ ✓
Actual-Interleaving-Delay-Downstream [26-142]
–
✓ ✓ ✓ ✓
Access-Loop-Encapsulation [26-144]
–
✓ ✓ ✓ ✓
IWF-Session [26-254]
CLI AAA Messages
There are four types of AAA messages used by CLI users to gain administrative access
to the router. Access-Challenge attributes pertain only to CLI/telnet users.
■
Access-Request
■
Access-Accept
■
Access-Challenge
■
Access-Reject
Table 43 on page 190 lists the RADIUS attributes supported for CLI AAA messages.
Table 43: CLI AAA Access Message RADIUS Attributes Supported
Access-Reject Access-Challenge Access-Accept Access-Request Attribute Name
Attribute
Number
– – –
✓
User-Name [1]
– – –
✓
User Password [2]
– – –
✓
NAS-IP-Address [4]
– –
✓ ✓
Service-Type [6]
✓ ✓
– – Reply-Message [18]
–
✓
–
✓
State
(Access-Request is only in
response to an Access-Challenge) [24]
– –
✓
– Class [25]
– –
✓
– Virtual-Router [26-1]
– –
✓
– Init-CLI-Access-Level [26-18]
– –
✓
– Allow-All-VR-Access [26-19]
– –
✓
– Alt-CLI-Access-Level [26-20]
190 ■
CLI AAA Messages
JUNOSe 11.1.x Broadband Access Configuration Guide