manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 515

For information about defining IP addresses, see the 

Configuring IP

 chapter in 

JUNOSe

IP, IPv6, and IGP Configuration Guide

.

DHCP Local Server Configuration Tasks

This section covers the configuration tasks for equal-access and standalone modes.
Perform the appropriate procedure:

1.

For both equal-access and standalone modes, configure the DHCP local server.

See “Configuring AAA Authentication for DHCP Local Server Standalone Mode”
on page 487 for a sample configuration.

2.

For standalone mode, optionally configure the router to use AAA authentication
for DHCP requests from subscribers.

See “Configuring AAA Authentication for DHCP Local Server Standalone Mode”
on page 487 for a sample configuration.

3.

For non-PPP equal access, configure the router to work with the SRC software.

See “Configuring the Router to Work with the SRC Software” on page 492 for a
sample configuration.

DHCP Local Server Configuration Tasks

■

475

Chapter 18: DHCP Local Server Overview

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands