manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 609

Related Topics

■

show dhcp relay proxy statistics

Monitoring DHCP Relay Statistics

Purpose

Display DHCP packet error and relay agent option statistics that are reported for
both DHCP relay and DHCP relay proxy, and also to display DHCP server statistics
related only to DHCP relay.

NOTE:

The 

show dhcp relay proxy statistics

 command displays additional DHCP

statistics that the router reports only for DHCP relay proxy.

Action

To display DHCP relay statistics:

host1# 

show dhcp relay statistics

                       DHCP Relay Statistics
                       ---------------------
                         Statistic                            Values
-----------------------------------------------------------   ------
Packet error statistics (standard & proxy modes):
  dropped discover packets, no resources                      0
  dropped dhcp packets, no resources                          0
  dropped bad message operation packets                       0
  dropped unknown message type request packets                0
  dropped unknown message type reply packets                  0
Relay Agent Option statistics (standard & proxy modes):
  add Relay Agent Option circuit ID suboption                 On
  add Relay Agent Option remote ID suboption                  On
  packets with giaddr override                                0
  packets with Relay Agent Option override                    2
  packets forwarded with Relay Agent Option already present   4
  dropped packets with Relay Agent Option already present     3
  dropped giaddr spoof packets                                0
DHCP server statistics (standard mode only):
  dropped duplicate request packets                           12
  packets transmitted to servers                              38
  packets received from servers                               26
  dropped unknown xid reply packets                           0
  dropped stale request packets                               12

To display detailed statistics for DHCP relay only, use the optional 

detail

keyword—this command displays DHCP server statistics and dropped unknown
message type reply packets statistics:

host1# 

show dhcp relay statistics detail

                     DHCP Relay Detail Statistics
                     ----------------------------
             Statistics                10.10.1.1  192.168.32.12   192.168.32.1
------------------------------------   ---------  -------------   ------------
Dropped unknown message type replies   0          0               0
Dropped duplicate requests             6          6               0
Packets transmitted to server          6          6               26
Packets received from server           0          0               26

Monitoring DHCP Relay Statistics

■

569

Chapter 22: Monitoring and Troubleshooting DHCP

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands