Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Page: 187 / 794

Table 28: show radius servers Output Fields (continued)
Field Description Field Name
Number of the UDP port of the RADIUS server Udp Port
Maximum number of times that the router retransmits a
RADIUS packet to the RADIUS server Retry Count
Interval (in seconds) before the router retransmits a
RADIUS packet to the RADIUS server Timeout
Number of outstanding requests to the RADIUS server Maximum Sessions
Amount of time to remove the authentication server or
accounting server from the available list when a timeout
occurs Dead Time
Configured authentication server or accounting server
secret Secret
Status of the configured RADIUS server:
■
dead-The status displayed if the server does not
respond within the configured number of retransmit
counts, and if Dead Time is configured to a non-zero
value.
■
active-The status displayed of the earliest configured,
non-dead server if the server is accessed using the
direct algorithm. The status displayed of all non-dead
servers if the server is accessed using the round-robin
algorithm.
■
alive-The status displayed of all non-dead servers
except the earliest configured non-dead server, if the
server is accessed using the direct algorithm. The
status of none of the servers if the server is accessed
using the round-robin algorithm.
Status
Related Topics
■
show radius servers
Monitoring RADIUS Services Statistics
Purpose
Use to display statistics for RADIUS services.
Use with the optional accounting , authentication , dynamic-request ,
route-download , or pre-authentication keywords to limit output to the specific type
of statistics. Use the optional delta keyword to specify that baselined statistics are
to be shown.
Action
To display RADIUS authentication and accounting statistics:
Monitoring RADIUS Services Statistics
■ 147
Chapter 2: Monitoring and Troubleshooting Remote Access