manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 258

■

radius include framed-ipv6-route

radius include framed-ipv6-route

■

Use to include the Framed-Ipv6-Route attribute in Acct-Start or Acct-Stop
messages.

■

You can control inclusion of the Framed-Ipv6-Route attribute by enabling or
disabling this command.

■

For this attribute, the value received from the RADIUS server in the Access-Accept
message is used in the accounting messages.

■

When the Framed-Ipv6-Route attribute is not returned from the RADIUS server
in the Access-Accept message, the immediate accounting, Acct-Stop, or
Interim-Acct messages do not report this attribute.

■

See radius include

■

Example

host1(config)#

radius include framed- ipv6-route acct-start enable

■

Use the 

no

 version to restore the default, disable.

[100] Framed-Ipv6-Pool

Use the following command to manage the Framed-Ipv6-Pool RADIUS attribute.

■

radius include framed-ipv6-pool

radius include framed-ipv6-pool

■

Use to include the Framed-Ipv6-Pool attribute in Acct-Start or Acct-Stop messages.

■

You can control inclusion of the Framed-Ipv6-Pool attribute by enabling or
disabling this command.

■

For this attribute, the value received from the RADIUS server in the Access-Accept
message is used in the accounting messages.

■

If the IPv6 pool name is configured in the AAA domain map using the CLI and
is not returned from RADIUS server, the Acct-Start, Acct-Stop, or Interim-Acct
messages report the value configured in the domain map.

■

See radius include

■

Example

host1(config)#

radius include framed- ipv6-pool acct-start enable

■

Use the 

no

 version to restore the default, disable.

[123] Delegated-Ipv6-Prefix

Use the following command to manage the Delegated-Ipv6-Prefix RADIUS attribute.

218

■

CLI Commands Used to Modify RADIUS Attributes

JUNOSe 11.1.x Broadband Access Configuration Guide

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands