manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Configuration Manual

Share
Download
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual Download Page 350

Table 58: show radius attributes-included Output Fields 

(continued)

Field Description

Field Name

Include status of the attribute in Acct-On messages:
enabled, disabled, not configurable (n/c)

Account On

Include status of the attribute in Acct-Off messages:
enabled, disabled, n/c

Account Off

Include status of the attribute in Access Request
messages: enabled, disabled, n/c

Access Request

Include status of the attribute in Acct-Start messages:
enabled, disabled, n/c

Account Start

Include status of the attribute in Acct-Stop messages:
enabled, disabled, n/c

Account Stop

Related Topics

■

show radius attributes-included

Monitoring Ignored RADIUS Attributes

Purpose

Display the RADIUS attributes that are ignored in Access-Accept messages.

Action

To display the RADIUS attributes that are ignored:

host1#

show radius attributes-ignored

attribute framed-ip-netmask ignored from RADIUS server
attribute atm-service-category (vsa) accepted from RADIUS server
attribute atm-mbs (vsa) accepted from RADIUS server
attribute atm-pcr (vsa) accepted from RADIUS server
attribute atm-scr (vsa) accepted from RADIUS server
attribute egress-policy-name (vsa) accepted from RADIUS server
attribute ingress-policy-name (vsa) accepted from RADIUS server
attribute virtual-router (vsa) accepted from RADIUS server
attribute pppoe-max-session (vsa) ignored from RADIUS server

Related Topics

■

show radius attributes-ignored

Setting the Baseline for RADIUS Dynamic-Request Server Statistics

You can set a statistics baseline for packet mirroring-related RADIUS statistics. To
show baseline statistics, use the 

delta

 keyword with the 

show radius

dynamic-request statistics 

command.

To set a baseline for RADIUS statistics for packet mirroring:

■

Issue the 

baseline radius dynamic-request 

command:

310

■

Monitoring Ignored RADIUS Attributes

JUNOSe 11.1.x Broadband Access Configuration Guide

Summary of Contents for JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands