Juniper JUNOSE 10.0.X PHYSICAL LAYER, Configuration Manual

Page: 96 / 262

4/0:1/1(unchannelized) up down
4/2:1/1(channelized) up lowerLayerDown
■
See show controllers e3.
■
See show controllers t3.
show controllers t3 remote
■
Use to display MIB statistics for the remote end of a T3 interface configured for
MDL.
■
Specify the all option to display detailed information for all 15-minute intervals.
■
For definitions of the MIB statistics for a T3 interface, see RFC 2496—Definitions
of Managed Objects for the DS3/E3 Interface Types (January 1999).
■
Field descriptions
■
Far End MDL Carrier bit—Status of MDL configuration on remote device
connected to T3 interface
■
set—MDL is configured for carrier mode
■
not set—MDL is not configured for carrier mode
■
Far End Equipment Identification Code—eic string sent by remote device
for MDL
■
Far End Line Identification Code—lic string sent by remote device for MDL
■
Far End Frame Identification Code—fic string sent by remote device for MDL
■
Far End Unit Identification Code—unit string sent by remote device for MDL
■
Far End Facility Identification Code—pfi string sent by remote device for
MDL
■
Far End Generator Number—generator string sent by remote device for MDL
■
Far End Port Number—port string sent by remote device for MDL
■
Number of valid intervals—Number of 15-minute intervals since the line
module was last powered on or reset
■
Time elapse in current interval—Number of seconds that have passed in the
15-minute (900-second) interval
■
C-bit errored seconds—Number of C-bit errored seconds encountered by a
T3 in the current interval
■
C-bit severely errored seconds—Number of C-bit severely errored seconds
encountered by a T3 in the current interval
■
C-bit coding violations—Number of C-bit coding violations encountered by
a T3 in the current interval
70 ■
Monitoring Interfaces
JUNOSe 10.0.x Physical Layer Configuration Guide