Juniper JUNOSE 10.0.X PHYSICAL LAYER, Configuration Manual

Page: 42 / 262

■
Use “show controllers t3” on page 30 to display the text description.
■
Examples
host1(config-controll)# t1 2 description london t1 interface
host1(config-controll)# t1 2/1 description london first ft1 interface
■
Use the no version to remove the text description or alias.
■
See t1 description.
t1 framing
■
Use to configure the framing format for T1 channels.
■
You must specify either esf (extended superframe) or sf (superframe) framing.
■
The framing format you choose must be compatible with the framing format at
the other end of the line.
■
Example
host1(config-controll)# t1 2 framing sf
■
Use the no version to restore the default value, esf .
■
See t1 framing.
t1 shutdown
■
Use to disable T1 channels or a subchannel.
■
To disable channels or a subchannel, specify one or more T1 channels or a
subchannel in
channel or channel/subchannel format.
■
channel —One or more T1 channels, or a range of channels in the range 1–28
■
subchannel —Subchannel from 1–24
■
The T1 interface is enabled by default.
■
Example
host1(config-controll)# t1 4-15,18,21,25-27 shutdown
■
Use the no version to restart a disabled interface.
■
See t1 shutdown.
t1 snmp trap link-status
■
Use to enable SNMP link status processing on T1 channels.
■
To enable or disable SNMP on an interface, specify T1 channels or subchannel
in
channel or channel/subchannel format.
■
channel —One or more T1 channels, or a range of channels in the range 1–28
■
subchannel —Subchannel from 1–24
■
Example
16 ■
Configuration Tasks
JUNOSe 10.0.x Physical Layer Configuration Guide