Juniper JUNOSE 10.0.X PHYSICAL LAYER, Configuration Manual

Page: 129 / 262

■
REI—Number of remote error indications
■
Far End Last Interval Counters—Statistics for the remote connection
associated with the SONET/SDH path in the previous 15-minute interval
■
Total Interval Counters—Statistics for all intervals or baselined statistics
■
Total Far End Counters—Statistics for all remote connections associated with
the SONET/SDH path
■
Example 1—Shows the MIB statistics for the path layer on interface 1/0.
host1# show controllers sonet 1/0 path
Channel number 0
Number of valid intervals - 31
Time elapsed in current interval - 141
Current status = LowerLayerDefect
Current Path Interval Counters Seconds Counts State
ES 0
SES 0
UAS 141
RDI 141 0 Active
AIS 141 0 Active
LOP 0 0 OK
UNEQ 0 0 OK
PLM 141 0 Active
BIP-B3 (Code Violation) 0 0
Last Path Interval Counters Seconds Counts
ES 0
SES 0
UAS 900
RDI 900 0
AIS 900 0
LOP 0 0
UNEQ 0 0
PLM 900 0
BIP-B3 (Code Violation) 0 0
Total Path Counters Seconds Counts
ES 0
SES 0
UAS 27255
RDI 27255 0
AIS 27255 0
LOP 0 0
UNEQ 0 0
PLM 27255 0
BIP-B3 (Code Violation) 0 0
Current Far End Path Interval Counters Seconds Counts
ES 0
SES 0
UAS 141
REI 0 0
Monitoring SONET/SDH Interfaces
■ 103
Chapter 3: Configuring Unchannelized OCx/STMx Interfaces