Juniper JUNOSE 10.0.X PHYSICAL LAYER, Configuration Manual

Page: 22 / 262

Table 3: Juniper Networks E-series and JUNOSe Technical Publications (continued)
Description Document
Provides the necessary procedures for getting ERX-14xx models,
ERX-7xx models, and ERX-310 routers operational, including
information about:
■
Installing the chassis and modules
■
Connecting cables
■
Powering up the routers
■
Configuring the routers for management access
■
Troubleshooting common issues
Describes switch router processor (SRP) modules, line modules, and
I/O modules available for the ERX routers.
ERX Hardware Guide
Provides detailed specifications for line modules and I/O modules in
ERX-14xx models, ERX-7xx models, and ERX-310 routers, and
information about the compatibility of these modules with JUNOSe
software releases.
Lists the layer 2 protocols, layer 3 protocols, and applications that line
modules and their corresponding I/O modules support.
Provides module LED information.
ERX Module Guide
Provides an overview and description of ERX modules that are
end-of-life (EOL) and can no longer be ordered for the following routers:
■
ERX-7xx models
■
ERX-14xx models
■
ERX-310 router
ERX End-of-Life Module Guide
JUNOSe Software Guides
Provides information about:
■
Planning and configuring your network
■
Using the command-line interface (CLI)
■
Installing JUNOSe software
■
Configuring the Simple Network Management Protocol (SNMP)
■
Managing the router and its modules, including the use of high
availability (HA) for SRP redundancy
■
Configuring and running a unified in-service software upgrade
(ISSU)
■
Configuring passwords and security
■
Configuring the router clock
■
Configuring virtual routers
JUNOSe System Basics Configuration Guide
Explains how to configure, test, and monitor physical layer interfaces. JUNOSe Physical Layer Configuration Guide
Explains how to configure and monitor static and dynamic link layer
interfaces. JUNOSe Link Layer Configuration Guide
Explains how to configure and monitor IP, IPv6 and Neighbor Discovery,
and interior gateway protocols (RIP, OSPF, and IS-IS). JUNOSe IP, IPv6, and IGP Configuration Guide
xxii ■
Related E-series and JUNOSe Documentation
JUNOSe 10.0.x Physical Layer Configuration Guide